6 FT HIGH x 50 FT LONG WINDSCREEN
15 COLORS TO CHOOSE FROM
Windscreen is ideal for anywhere you need a visual barrier. When hung on a fence it provides a solid background; reducing visual distractions, increasing visibility and eliminating unwanted spectators.
Please allow 2 to 4 weeks for delivery.
- Vinyl coating makes it the strongest and most durable material available
- If cut it will resist fraying
- Can be screen printed with your school logo or advertisements
- 83% UV Resistance, 84% shade
- Weighs 8.2 oz per sq/yd
- Maximum UV sunlight protection and mildew resistance
- Extra heavy-duty 6-ply, 1 1/2" wide reinforced borders (strongest available)
- Brass tooth grommets spaced every 18" around the perimeter
- 3-year limited warranty when properly installed.
SUGGESTED PROCEDURE FOR INSTALLATION AND TIPS:
1. Start at one end of the fence area to be covered. Lay out full panel along area to be covered. Attach top corner grommet to the fence with tie wrap (or cord). Then, attach along top, pulling cover taut with each grommet attachment for about 10’.
Tip 1: Use a few “S” hooks to temporarily hang the panel on the fence. By “lifting” the panel, it lessens the weight and makes it easier to attach and tighten the tie wrap at the grommet.
Important! Attach at every grommet. Do not skip grommets. Attachment at all grommets distributes the force when there is a high wind load. Using fewer grommets for attachment results in more load on attached grommets and greater chance of ties breaking. When windscreen cover breaks loose and whips against the fence, it can be damaged beyond repair in a few hours.
Tip 2: Attach tie wrap to the fence in the direction the panel is being pulled (rather than slightly backward). As the tie is tightened, it will pull the cover taut. Make sure tie is secure, but don’t over tighten tie wraps (Tightening the tie wraps too much might result in wrinkling of cover and insufficient room to straighten out panel). After panel is completely attached, ties can be tightened more, if necessary, to minimize any remaining wrinkles.
2. Go back to end and from top-to-bottom attach vertical edge to the fence all the way to the bottom, again pulling taut as each tie is secured.
3. Continue attachment along bottom for about 10’ pulling cover taut and making it as wrinkle free as possible.
Tip 3: If two or more people are working on the panel, have one person begin attachment at the top and the second person at the bottom, working about 10’ behind the first.
4. After the first 10’ of windscreen is attached at top and bottom, go back to the top and attach along the next 10’, pulling taut.
5. Continue top/bottom attachment until panel is completely in place.
6. Continue installation with remaining panels using the same procedure.
Tip 4: Don’t install on a windy day. Wind will complicate installation.
IMPROPER INSTALLATION PROPER INSTALLATION